Aeotec SmartThings Hub (v3) – The Pro-Grade Hub for Total Smart Home Control
Overview: Full Protocol Power in a Single, Reliable Hub
The Aeotec SmartThings Hub (v3) is the flagship automation controller for power users, serious homebuilders, and professional-grade smart homes. It’s the official hardware continuation of Samsung’s original SmartThings Hub and supports the widest range of protocols: Z-Wave, Zigbee, Matter, LAN, and limited Bluetooth.
Unlike lightweight hubs, Aeotec is built for stability, scale, and speed. It plugs in via Ethernet for rock-solid local control, supports up to 200+ devices, and gives you access to the full power of SmartThings automations, scenes, and routines.
If you’re building a security system, automating a full home, or planning long-term device expansion, this is your go-to control center.
Hub Features: Built for Builders, Not Beginners
- Z-Wave + Zigbee Support – Connect sensors, locks, lights, plugs, and more directly.
- Ethernet Port – Prioritize reliability and local control via hardwired connection.
- Matter Controller – Add Matter-certified devices across brands.
- SmartThings App Integration – Manage everything in one dashboard.
- Edge Driver Support – Local, fast automations with zero cloud delay.
- Over 200 Device Limit – Ideal for large homes or complex scenes.
- Works with Alexa and Google – Voice control your SmartThings ecosystem.
- LAN + Cloud Devices – Control Wi-Fi products and cloud services in sync with local automations.
Ideal Use Cases for Aeotec SmartThings Hub
- Security-Centric Homes
Integrate sensors, sirens, motion detectors, and locks with local routines for instant alerts and protection—even if the internet drops.
- Smart Home Power Users
Use multi-step automations, custom scenes, and presence-based triggers to fine-tune home behavior.
- Large Homes & Complex Setups
Control hundreds of devices without bottlenecks. Aeotec’s hardware is built for scale.
- Z-Wave Ecosystem Loyalists
Only SmartThings and Hubitat hubs fully support Z-Wave locks, sensors, dimmers, and water valves.
- Wired Stability Seekers
Prefer Ethernet over Wi-Fi? This is one of the only Matter/Z-Wave hubs with physical LAN ports.
What It Controls
- Locks – Schlage, Yale, Kwikset (Z-Wave or Zigbee)
- Lighting – Sengled, GE Cync, Hue (Zigbee), Nanoleaf, Matter
- Plugs & Switches – GE/Jasco, TP-Link, Zooz, Aeotec
- Sensors – Aqara, Aeotec, Zooz, Ring
- Thermostats – Ecobee, Honeywell, GoControl
- Security Gear – Sirens, door contacts, tilt sensors, water leak alarms
- Cameras – Integrations with Ring, Arlo, Wyze (via cloud links)
Trigger automations via:
- Voice
- Sensor changes
- Schedule or mode
- Mobile location (presence)
- Button press or app shortcut
Device Compatibility
- Z-Wave: Zooz, Aeotec, Fibaro, GE, Everspring
- Zigbee: Sengled, Innr, IKEA, Yale
- Matter: Eve, Nanoleaf, GE Cync, Aqara
- Wi-Fi / LAN: TP-Link Kasa, Ecobee, Chromecast, Nest
- Voice Assistants: Alexa, Google Assistant
Comparison Table: Aeotec vs Other Hubs
Feature | Aeotec SmartThings Hub | SmartThings Station | Echo 4th Gen | HomePod mini |
Zigbee Support | Yes | Yes | Yes | No |
Z-Wave Support | Yes | No | No | No |
Matter Support | Yes | Yes | Yes | Yes |
Thread Support | Yes (via dongle) | Yes | Yes | Yes |
Local Automation (Edge) | Yes | Yes | Partial | Yes |
Ethernet Port | Yes | No | No | No |
Best Use Case | Large homes + Z-Wave users | Small homes + renters | Voice-first automation | Apple ecosystem only |
Price (CAD) | ~$175 | ~$150 | ~$100 | ~$129 |
Setup Guide
- Plug the hub into power and your router via Ethernet
- Install the SmartThings app
- Add the Aeotec hub via QR code or Bluetooth pairing
- Assign it to a location and room
- Begin adding devices (Zigbee, Z-Wave, or Matter)
- Use Edge drivers for faster local automations
- Create routines based on time, presence, sensor, or triggers
User Reviews (Summarized from Samsung + Amazon)
- “I replaced two older hubs with Aeotec—everything’s stable and smooth now.”
- “Z-Wave lock integration was flawless. Scenes trigger instantly.”
- “Ethernet port was the key. I hate relying on Wi-Fi for smart home stability.”
- “It’s overwhelming at first, but once set up, this thing runs the whole house.”
- “I use it with Alexa routines and my SmartThings water sensors—saved me twice from flooding.”
Tracey’s Expert Verdict
“The Aeotec SmartThings Hub is a serious solution for serious builders. If you care about security, reliability, and expansion, this hub earns its spot. It’s the only major hub that combines Z-Wave, Zigbee, and Matter with full Ethernet stability.”
“I recommend it for homes with 50+ devices, anyone using Z-Wave sensors or locks, and homeowners who need zero-failure automation.”
Smart Kit CTA
Want a battle-tested hub setup with long-term reliability and advanced automation?
[Take the Smart Kit Quiz] and get:
- A curated list of Z-Wave and Zigbee gear
- Step-by-step routines for lighting, locks, sensors, and security
- A free PDF download with product links, tags, and setup diagrams
- Scalable automation plans for growth over time
Still Have Questions?
Q. Can I use this with a mesh Wi-Fi system?
Yes. Just plug into your primary node or router via Ethernet.
Q. Can it control Matter and Z-Wave devices?
Yes. It is one of the only hubs that supports both protocols natively.
Q. Does it work with HomeKit or Siri?
No. This hub supports Alexa and Google but not Apple HomeKit.
Q. What happens if the internet goes down?
Edge-based automations still run locally for Zigbee and Z-Wave devices.
Tag List
- Device: aeotec-smartthings-hub
- Brand: aeotec
- Platform: smartthings
- Grouped: smart-hubs
- Use-Case: z-wave-users, prosumers, security-setups, wired-homes
- Structure: products